Product Description
The quick-mount bracket for the Jablotron JA-151M/JA-155M is designed to securely mount the magnetic contact onto an overhead garage door, ensuring reliable open/close detection using gravity.
When the garage door opens, the bracket’s positioning allows the magnet to naturally tilt or slide away due to gravity. This breaks the magnetic contact, immediately sending an open status signal to the alarm system. As soon as the door closes, the magnet returns to its initial position, restoring the closed state.
This solution eliminates the need for complex custom fabrications and provides a clean, professional installation specifically tailored to garage doors.
Ideal for alarm installers looking for a fast, reliable, and mechanically simple solution.
Key Features
Specifiek ontworpen voor de Jablotron JA-151M én JA-155M Geoptimaliseerd voor installaties op garagepoorten Magneetscheiding op basis van zwaartekracht bij het openen van de poort Snelle en stevige montage Strakke, professionele afwerking Geen aanpassingen aan de detector nodig Duurzame en met precisie vervaardigde beugel
Optimized for garage door installations
Gravity-assisted magnet separation upon door opening
Fast and secure mounting
Clean, professional finish
No modifications to the magnetic contact required
Durable and precision-engineered bracket
How It Works
The JA-151M/JA-155M magnetic contact is mounted to the garage door using the bracket.
When closed, the magnet remains neatly aligned with the sensor.
When the door opens, gravity causes the magnet to move away.
The magnetic contact registers an open status and signals the alarm system.
Simple physics. Reliable detection.
Important Notes
Only compatible with Jablotron JA-151M and JA-155M wireless magnetic contacts.
Magnet is not included unless explicitly stated otherwise.
Installation must be carried out by a qualified installer.
Always verify proper alignment and signal transmission after installation.
Installation Guide
Mount the magnet onto the moving section using the short screws.
Use 2 long screws to mount both the magnetic contact and the bracket to the door simultaneously.
